SVX J3 Backplane - J3 Connector Drawings

J3 Connector Drawings

The 235 pin J3 connector consists of two separate connector components;
a 125 position and a 110 position, Type B, 2mm Hard Metric (HM) right angle connectors. These connectors can be used for both the main VMEbus module (400mm x 9U) and also for the trasition module. GIF drawings are included below for each of these connectors.

125 position, Type B, 2mm HM connector
110 position, Type B, 2mm HM connector (not available)

Back to J3 page